Описание

Подшипники из инновационных высокоэффективных пластмасс и полимеров, срок службы которых легко рассчитать, помогают клиентам компании igus, основанной в 1964 году в г. Кельн, Германия, повысить эффективность своей работы и сократить операционные расходы. Производственные мощности компании, на которых производятся как стандартные промышленные подшипники, так и подшипники по индивидуальным техническим заданиям, расположены в штате Род-Айленд, США.1. Attachment from any side 2. Stable under large forces due to undercut design 3. Straight running inner/outer link 4. NC without camber 5. Inner cross-section completely accessible for easy filling 6. Opening crossbars can be folded open on both sides 7. Can be opened along the inner and outer radius 8. Lower weight, better dynamic qualities 9. Quiet running due to built-in brakeR4.31L Series is suitable for the following types of applications: Vertical: hanging applications, standing applications Horizontal: unsupported applications, gliding applications, unsupported side-mounted applications When to use Series R4.31L
  • When a light, low priced energy tube with an inner height of 31 mm and excellent dynamic qualities is required
  • Lower weight possible at higher dynamics
  • Inner width up to 300 mm
  • For unsupported lengths up to 2.0 m
  • When you need an optimised ratio of inner to outer dimensions with thinner outer links and optimised opening crossbar geometry
  • When very tightly closing lids with almost no gaps and openings is required
  • Also suitable for side-mounted, standing and hanging applications
  • If short installation times are required
When not to use Series R4.31L
  • When an extremely low noise (=46 dB(A)) and low vibration e-chain®/e-tube is required Series E6.35
  • If even higher stability is required Series E4.32
  • In the case of long travels with gliding Series E4.32
  • If a compromise for more cost-effective price/strength can be made Series 2600/2700
''